What is the best place to find a variety of antenna Mounting solutions?
Where can the TNC and N-Type male connectors be purchased?
I have a BreezeACCESS AU – SU in a point-to-point configuration, and is performing badly. How do I tell which unit is causing the problem without replacing both units?
I would like to inquire if there is special test equipment for BA and BN products for first line (field) and second line (shop) maintenance?
How do I obtain the “Pigtail Cable” to install an antenna with the BreezeAccess II indoor or the BreezeNet Pro.11 radios?
What type of attenuation will occur @ 2.4 Gig for various types of coaxial cable?
I have just installed 6 AU-E’s and sectoral antennas on my tower, and when I use best AU feature, some of my SU’s can “see” 2 or 3 antennas, and some can see all 6. Why? I thought t
My local AM radio station will rent me space on one of their towers. Is there any issue I should watch out for?
As there is more 2.4 GHz ISM equipment installed, especially in urban areas, how do we combat the threat of interference?
I need to install a long link over water, from the mainland to an island. What do I need to consider making sure the path will work?
I have a switch that connects my router to my Access Units at my tower site. Can I let the switch auto-negotiate?
How long can my PI-CAT-5 cable be?
We are seeing some MAC addresses appear on the Breeze management screens that begin with 00-30. Have any of the newer radios been given a MAC address other than the 00-20 range?
Our client has an IP telephone system linked to a traditional PBX. The IP system is spread around their site through wireless links. The IP system is connected to an AP-10, which transmits th
What TCP ports does SNMP communicate over?
I need to know if any of your products are affected by the newly discovered SNMP vulnerability and if so, what do we need to do to protect ourselves.
Can the BreezeAccess II indoor products be amplified?
What is the recommended position to mount the Outdoor Unit?
Are the connections for the AU-I-D and all of the SU-I-D models the same as BreezeNET Pro.11?
Where should I mount the Outdoor Unit of the AU-E?
Can I hot swap IF cables from one Base Station Indoor Unit to another?
What type of connectors will need to be on my coaxial cable if I want to connect it to the Indoor piece and the IF interface on the transverter of the BreezeAccess II IF system?
What does the WLINK LED on the Indoor Units of the AU and SU represent?
What type of connector needs to be used to interface an antenna to the transverter of an AU-E or a SU-E?
What type of coaxial cable can be used for the IF transmission between an indoor unit and the transverter of the BreezeAccess IF system?
What factors need to be considered when choosing an IF coaxial cable replacement for the cable shipped with the BreezeAccess II IF system?
What do the 2 LEDs on the Ethernet port of the Indoor Units of the AU and SU represent?
Is the BreezeACCESS II system a full duplex product?
Does BreezeACCESS support Spanning Tree Protocol?
What is the Username and password for access to the BreezeACCESS technical support section of the Alvarion websites?
Every time I configure a radio via the local monitor session, and then try to TELNET into the same radio remotely, I get a “Session to Host Lost” message. What’s going on?
What security features are offered in BreezeACCESS II?
Do you have any configuration assistance documents for configuring Cisco VoIP equipment?
How can I shut off the ethernet port without loosing management of a SU-x unit?
My AU started acting up tonight. I noticed that the unit wasn’t responding to SNMP polls, so I went to check on it. I reset it and it lost all its configuration information. No biggy right? W
I am trying to use both the Raylink CPE & the Breeze Access together. I guess the older Breezecom APs work with the Raylink CPE but as best as I can tell this is not the case for the
BreezeACCESS is not fully 802.11 compatible, but uses 802.11-transmission and collision avoidance algorithm only. BreezeNET Pro.11 is more nearly 802.11 compliant, but the 802.11 standard onl
I think I am suffering 440 Mhz IF interference in my BA II system. Can I install a band pass filter to stop it?
I have installed our BreezeACCESS II AU-E-BS-2.4 in a site with a lot of 2-way radio and 900 Mhz cellular also installed in the site. Performance is poor, and I’d like to know how I
I have an SU-A that is associated to an AU-E on a 5-mile path. I believe that I have Line of Sight, but the clearance is very close – there are quite a few trees along the path as I
I have a question regarding the voice capabilities of the BreezeAccess II product line. I see that the voice capable SU's have a voice jack that takes a standard telephone if I read the docum
What I would like to know is how can I give a dedicated 64 kbps link to a client with BreezeAccess 2.4 AU/SU sets? Is it that I set CIR and MIR to 64? In that case, what happens when I give t
I am attempting to update the firmware to 3.0.31 but the documentation says to use tftp to transfer the file, but as stated, the ethernet port is not responding. How can I update th
We have two customers in the same little strip mall. They don't "get along" and therefore we need to do two installs. Both units will run "Best AU Support" though will bot
I have a BreezeACCESS network with 15 SU’s associated to a single AU. During some times of the day, if I ping from my network management station to a device on the wired side of the SU’s, I’l
I have a BA link that seems to have very high transmit errors. This link is about 5 miles long, with an Omni-8 antenna on an AU-E at the tower site, and an SU-A at the customer location. Down
How can I recover a unit if I loose the Installer password?
What CE devices does Alvarion have SA-PCx driver support for?
What are the adverse affects of having a BreezeAccess II AU communicating with BreezeAccess II SU’s and BreezeNet PCMCIA cards and SA 10’s?
I have some old BreezeNET Pro equipment. Can I upgrade it to Pro.11?
Which MIB variable gives me a good overall view of my WLAN performance?
What are the dimensions of the ODB-1 box?
If I am trying to upgrade a WB from Pro to Pro.11, and the upgrade fails, can I replace the flash PROM to get the unit back?
Do you have a PCI bus adapter for your SA-PCR card?
I have a BreezeNET Pro.11 system, and I wish to implement WEP. How do I do that?
I've got a problem with an access point which stops passing traffic to radios in one sector. It has 14 stations associated with it, and it will drop its connections to these stations one at a
I have set my SNMP write community string to a string value longer than 8 characters. How do I recover the string so that I can configure the unit using the Pro.11 configuration utility?
How do I obtain the technician password for BreezeNET Pro.11 units?
Alvarion requires a technical non-disclosure form to be filled out before the password is released to a company or individual. Email or call Alvarion technical support and the form will be em
I have an AP-10 and an SA-10. The AP-10 is currently hooked to a PC server; we would like to get a new Macintosh server. Will your system work with the Mac?
I have version 4.4.1 firmware in my network and I wish to implement WEP. How do I change the radio from open key to shared key?
I have set up an AP-10 Access Point in our test environment at work and am attempting to connect to it using an SA-PCR connected to a PII 300 MHz PC. The yellow light continues to flash on th
I have a BreezeNET Pro.11 network consisting of many AP-10’s with their coverage areas overlapping to provide redundant continuous coverage. I am concerned that if one of the ethernet links t
We have a Pro.11 system that has SA-10’s mounted in vehicles. Our site survey data analysis is based on static (fixed location) measurements. Should we expect throughput degradation with the
I have an SA-10 that associates to the AP-10 then disassociates over and over again. I checked the configuration and the ESSID is correct and I have reset them to factory defaults and it cont
Where can I get longer lengths of the shielded outdoor CAT-5 cable, and the shielded crimp-on RJ-45 plugs?
How much shielded CAT-5 cable can I use between the Indoor and Outdoor units?
I want to power my site with solar power. What is the DC power consumption of the RB and BU-DS.11?
Can an RB-DS.11 connect to an RB-DS.11 or PC-DS-11 card?
Does Alvarion manufacture an EMI filter for the CAT-5 cable between the indoor and outdoor unit?
Does Alvarion sell a lightning protection device for the outdoor CAT-5 cable used in the RB and BU-DS.1?
I am working with a client who currently is using two WBS-DS.11 devices to connect two buildings together. Can you offer any recommendations or documentation on how I can tighten up security
We are constantly being asked to compare the Breezecom solution to other manufacturer’s 802.11b equipment. Intel’s 2011 series base station acts as a bridge as well and is half the
I was told by Alvarion sales support that the RB-DS.11D would associate with the WBS-DS.11 without problem - no upgrades or anything else required. Is this true?
I have enabled a log file on my DS.11 units, and I need to know what the numbers mean!